TNF-α、IL-6、IL-8在Modic I型改变腰椎终板与椎间盘髓核中的表达及关系研究

目的 探讨腰椎Modic I型改变的腰椎终板与椎间盘髓核中TNF-α、IL-6、IL-8 的相关性。方法 收集30 例因下腰痛入院手术治疗并行腰椎MRI 检查确认为腰椎Modic I型改变患者的术中病灶椎间盘标本,进行免疫组化检测,并观察椎间盘组织病理变化及炎症因子的表达,IL-6、IL-8 相对表达水平以相对表达量△Ct 或（2-△Ct×104）进行分析。结果 Modic I型终板中TNF-α表达水平（9.2±0.7）高于髓核（7.2±0.5）,差异有统计学意义（P＜0.05）;髓核中△Ct IL-6、△Ct IL-8 相对表达量（6.34±1.82、10.62±1.88）高于终板（4.07±1.86、5.92±1.31）,差异均有统计学意义（均P＜0.05）。结论 Modic I型终板中TNF-α、IL-6、IL-8的表达水平明显高于髓核,其引起下腰痛的原因主要为终板的炎症改变。     

使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

Influence of the molding angle on tensile properties of FDM parts with orthogonal layering

Fused deposition molding (FDM) is one of the most widely used three‐dimensional (3D) printing technologies. This paper explores the influence of the forming angle on the tensile properties of FDM specimens. Orthogonal layering details were studied through experiments, theory, and finite element simulations. The stiffness and strength of the specimens were analyzed using the classical laminated plate theory and the Tsai–Wu failure criterion. The experimental process was simulated using finite element simulations. Results show that it is feasible to predict the stiffness and strength of FDM specimens using classical laminated plate theory and the Tsai–Wu failure criterion. A molding angle of 45° leads to specimens with maximized tensile properties. Numerical simulations show that changing the molding angle changes the internal stress and deformation fields inside samples, leading to FDM samples with different mechanical properties due to the orthogonal layers at different molding angles.     

Nonlinear thickness-shear vibration of an infinite piezoelectric plate with flexoelectricity based on the method of multiple scales

This paper presents a nonlinear thickness-shear vibration model for onedimensional infinite piezoelectric plate with flexoelectricity and geometric nonlinearity. The constitutive equations with flexoelectricity and governing equations are derived from the Gibbs energy density function and variational principle. The displacement adopted here is assumed to be antisymmetric through the thickness due to the thickness-shear vibration mode. Only the shear strain gradient through the thickness is considered in the present model. With geometric nonlinearity, the governing equations are converted into differential equations as the function of time by the Galerkin method. The method of multiple scales is employed to obtain the solution to the nonlinear governing equation with first order approximation. Numerical results show that the nonlinear thickness-shear vibration of piezoelectric plate is size dependent, and the flexoelectric effect has significant influence on the nonlinear thickness-shear vibration frequencies of micro-size thin plates. The geometric nonlinearity also affects the thickness-shear vibration frequencies greatly. The results show that flexoelectricity and geometric nonlinearity cannot be ignored in design of accurate high-frequency piezoelectric devices.     

分布振子复合板的模态阻尼及多点激励下阻尼减振相关性

分布阻尼振子可拓宽结构减振频带,因此可将振子分布于板中以形成复合板（简称“分布振子复合板”）,进而实现较宽的减振频带．对于多点支撑处受到宽频非一致激励（例如在不同激励点处的激励频率、幅值与相位有差异）的分布振子复合板,目前还缺乏有效简便的优化控制指标．在作者之前的研究中,针对含分布振子的梁推导了基于模态应变能的模态阻尼计算理论,讨论了模态阻尼与单点激励下梁的减振效果的相关性,并应用于宽频减振设计优化．本文进一步将模态阻尼计算理论推广到分布振子复合板,并将研究从梁的单点激励扩展到板的多点非一致激励下的阻尼减振相关性．首先,在利用模态应变能法推导得到分布振子复合板的模态阻尼计算公式后,从理论上讨论了不同边界条件与模态阶次对计算结果的影响,以及计算理论的适用性．而后,进一步通过有限元参数分析了边界条件、频率比、模态阶次与质量比的影响．最后,通过算例分析了无振子板或分布振子复合板在四个激励点具有多种幅值与相位组合情况下的稳态响应．结果表明,推导的模态阻尼计算公式可正确预测不同边界条件下的模态阻尼,且理论预测的模态阻尼与基板的稳态平均加速度减小率、稳态峰值应变能减小率均有较高的相关性．     

Experimental investigation on the distribution uniformity and pressure drop of perforated plate distributors for the innovative spray-type packed bed thermal storage

As an innovative thermal energy technology, the spray-type packed bed has advantages of high efficiency and low cost. A liquid distributor is the key component for the spray-type packed bed for scattering heat-transfer liquid drops evenly. In this study, the distribution performance and pressure drop of the perforated plate distributors of different orifice diameters were studied experimentally. The experimental results indicate that orifice diameter has a greater effect on the distribution performance compared to flow rate. With an increase in flow rate, the flow pattern through the distributor changes from the uncovered drop to the covered drop and then to the jet flow. The covered drop pattern shows the best performance with a good distribution and a small pressure drop simultaneously, which is the design and optimization principle of the distributor for a spray-type packed bed.     

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.     

Application of parameter differentiation for flow of a third grade fluid past an infinite porous plate

This article investigates the analytic solution for the flow of a third grade fluid past an infinite porous plate. The method of parameter differentiation is used to linearized the governing flow equation. The solution of the obtained linear equation is developed by differential transform method in combination with the method of superposition. The obtained results are compared with existing results in the literature and an excellent agreement is found. This shows that the parameter differentiation is a powerful technique for solving nonlinear problems. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2010     

HF激光脉冲与水柱表面相互作用产生电信号(英文)

研究了脉冲HF激光与水柱表面相互作用下电信号的产生过程。电信号显示了与激光能量线性相关的峰值间有时间间隔的两峰结构,且第二个尖峰在水柱底部的蒸汽腔塌缩后出现。实验还显示电信号的幅值和激光脉冲照射过程中是否存在膨胀和挤压的薄水层密切相关。如果在电池上边缘和石英平板(石英板紧邻电池,并与水柱上表面相接)之间存在一薄水层,电信号强度会增加10倍。